Removing and installing fuel strainer in intake connection of fuel metering pump

AR83.70-D-5653B

Removing and installing fuel strainer in intake connection of fuel metering pump

4.11.96

 

Removal, installation

 Danger!

Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation

Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves.

AS83.70-Z-0002-01A

 Danger!

Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled or absorbed. Contact with fuel can cause eye and skin injury.

Fire, open lights and smoking prohibited.
Fill and store fuel only in containers intended for this purpose and marked accordingly.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Remove heater

Models 901.36/37/46, 902.36/37/46/47, 903.36/37/46/47, 904.36/46 left-hand steering

AR83.70-D-5302E

Models 901.36/37/46, 902.36/37/46/47, 903.36/37/46/47, 904.36/46 right-hand steering

AR83.70-D-5302D

2

Loosen hose clamp (2)

3

Pull off fuel line (1)

 Catch fuel running out.

4

Unscrew union nut (4)

 To loosen union nut hold fuel metering pump.

5

Remove fuel strainer filter (5)

6

Install in opposite order