AR83.70-D-5302E | Removing and installing auxiliary heater | 28.11.96 |
MODEL 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# 1# up to 753730 up to 31.10.97 with CODE (H11) Hot air auxiliary heater
Heater designation D3L-C
D83.70-0065-06
1 Mounting clamp
2 Hot air hose
3 Mounting clamp
4 Fresh air hose
5 Mounting clamp
6 Fuel line
7 Hex. head bolt
8 Hex. head bolt
9 Electrical connector
10 Electrical connector
11 Cable strap
12 Heater
| Removal, installation | ||
Danger! | Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation | Do not start up or operate stationary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves. | |
1 | Loosen mounting clamp (1) and pull off hot air hose (2) | ||
2 | Loosen mounting clamp (3) and pull off fresh air hose (4) | ||
3 | Support fuel tank | ||
4 | Loosen clamping straps for fuel tank | ||
5 | Lower fuel tank until fuel lines are accessible | ||
Danger! | Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled or absorbed. Contact with fuel can cause eye and skin injury. | Fire, open lights and smoking prohibited. Wear protective clothing when handling fuel. | |
6 | Loosen hose clamp (5) and pull off fuel | Catch fuel running out. | |
7 | Support heater (12) | ||
8 | Unscrew hex. head bolts (7, 8) on both sides | ||
9 | Lower heater (12) until electrical connectors (9, 10) are accessible | ||
10 | Remove cable strap (11) | ||
11 | Disconnect electrical connectors (9, 10) | ||
12 | Lift heater (12) out | ||
13 | Install in opposite order |