AR83.70-D-5399C | Removing heater from housing, installing | 5.9.97 |
MODEL 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater
Heater designation B3L-C compact
MODEL 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater
Heater designation D3L-C compact
D83.70-0182-06
1 Heater
2 Housing center section
3 Left end plate
4 Right end plate
5 Cover
6 Connector
7 Connector
8 Phillips screw
9 Plastic washer
10 Adapter
D83.70-0183-06
1 Heater
2 Housing center section
11 Flange
12 Flange gasket
13 End section
14 Intake hose
15 Exhaust pipe
16 Pipe clamp
17 Hex. head bolt
18 Nut
19 Hose clamp
20 Mounting nuts for heater
21 Washer
| Removal, installation | ||
Danger! | Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation. | Do not start up or operate stationary heaters, auxiliary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves. | |
Danger! | Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled while handling open fuel. Contact with fuel can cause skin and eye injury. | Fire, open lights and smoking prohibited. Avoid sparks. Fill and store fuel only in containers intended for this purpose and marked accordingly. Wear protective clothing when handling fuel. | |
1 | Remove heater | ||
2 | Remove adapter (10) | Bayonet connection | |
3 | Remove right end plate (4) | ||
4 | Remove connector (6) on left end plate (3) | ||
5 | Remove left end plate (3) | ||
6 | Disconnect connection hose (14) from end section (13) | ||
7 | Remove connection hose (14) from flange (11) | . | |
8 | Remove exhaust pipe (15) from flange (11) | ||
9 | Remove connector (7) from housing center section (2) | ||
10 | Unscrew heater mounting nuts (20) and remove washers (21) | ||
11 | Remove heater (1) | ||
12 | Remove flange gasket (12) | Installation: Check flange gasket for damage, replace if necessary. | |
13 | Install in opposite order |