AR83.30-D-5540A | Remove/install evaporator | 7.12.06 |
MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning
| Remove/install | ||
| The evaporator is part of the heater housing and can only be removed and installed or replaced together with it. | ||
Danger! | Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant. | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged. | |
1 | Discharge air conditioning system | ||
| Protect air conditioning circuit and components from moisture when carrying out repair work | All models fitted with air conditioning | |
2 | Remove heater housing | Installation: Top up compressor oil | |
| |||
3 | Install in the reverse order | ||
4 | Remove fluid reservoir | Whenever a new evaporator has been installed the fluid reservoir must always be replaced too | |
5 | Evacuating air conditioning system, leak test | ||
6 | Fill air conditioning system, replenish (gaseous) | ||
7 | Fill air conditioning system (liquid) |
Air conditioning