P83.25-2242-09
1 Water collector
2 Rubber seal
5 Clip
6 Water drain hose
3 Cable
4 Spreading clip
| Remove/Install | ||
1 | Remove wiper arms | ||
2.1 | Unclip the multifunction sensor and, leaving the line connected, place it to the side | On vehicles with code (581) Comfort automatic air conditioning | |
3 | Remove the rubber seal (2) in the area of the water collector (1) | ||
4 | Unclip the line (3) for the windshield washer nozzles | ||
5 | Remove the expansion clips (4) from the water collector (1) | ||
6 | Unclip water collector (1) in the area of the windshield (arrows) | Installation: Replace defective clips (5). | |
7 | Remove water drain hose (6) from the water collector (1) | ||
8 | Remove water collector (1) | ||
9 | Install in the reverse order |