ar8325p1402tx

Remove/install water collector

Type ar · topic 83.25 · version 0100 · 2004-09-14

Applies to: MODEL 219.3

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 219 (models 3**)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.44 Trim/trim element/front protective paneling — Series 219 (models 3**)

AR83.25-P-1402TX

Remove/install water collector

3.8.04

MODEL 219.3

Remove/install water collector

P83.25-2242-09

1 Water collector

2 Rubber seal

5 Clip

6 Water drain hose

3 Cable

4 Spreading clip

Remove/Install

1

Remove wiper arms

AR82.30-P-6100TX

2.1

Unclip the multifunction sensor and, leaving the line connected, place it to the side

On vehicles with code (581) Comfort automatic air conditioning

AR83.40-P-6730TX

3

Remove the rubber seal (2) in the area of the water collector (1)

4

Unclip the line (3) for the windshield washer nozzles

5

Remove the expansion clips (4) from the water collector (1)

6

Unclip water collector (1) in the area of the windshield (arrows)

Installation: Replace defective clips (5).

7

Remove water drain hose (6) from the water collector (1)

8

Remove water collector (1)

9

Install in the reverse order

Referenced documents