AR82.70-P-8951P | Remove/install antenna | 15.3.10 |
MODEL 203.0,
209.3 up to 31.5.06
with CODE (354) Telephone antenna (D and E nets)
with CODE (387) Preinstallation for telephone "Handy", UPCI system, USA/Canada
with CODE (359) TELE AID emergency call system
with CODE (529) HIGH Class Japan
with CODE (534) Audio 20 CD radio, Japan
P82.62-2164-06
1 Antenna
2 Antenna base
3 Telephone antenna connection
4 Rear window
A2/22 Telephone antenna
X1/16 Antenna systems connector
P82.70-3113-01
Shown on right C-pillar
X1/16 Antenna systems connector
| Remove/install | ||
| Notes on avoiding damage to electronic components due to electrostatic discharge | ||
1 | Detach headliner and place down to front | Model 203.0 | |
Model 209.3 | |||
2 | Remove antenna systems connector (X1/16) from bracket on right C-pillar and detach | ||
3 | Detach telephone antenna connector (3) and antenna base (2) from rear window (4) | Carefully heat repair area using hot air gun. | |
Installation: When gluing on telephone antenna (A2/22), make sure that after removing the protective foil on the adhesive pad, it is stuck to the rear window (4) immediately. Once positioned, apply pressure to the telephone antenna (A2/22) for approx. 5 s. | |||
| |||
4 | Remove adhesive residues from rear window | Use activator. | |
Apply bonding agent to bonding surface on rear window and allow to flash off for approx. 1 minute before gluing on the antenna. | |||
5 | Install in the reverse order |
Special tools
110 589 03 59 00
Mounting wedge
Repair materials
Number | Designation | Order number |
BR00.45-Z-1019-02A | Bonding agent Sika primer 206 G+P | Sika Deutschland GmbH |
BR00.45-Z-1023-04A | Sika activator | A 005 989 58 71 |