AR82.61-P-7474P | Remove/install antenna for global positioning system (GPS) on vehicles with APS | 15.11.11 |
MODEL 203,
209.3 up to 31.5.06
with CODE (352) COMAND operating and display system
with CODE (353) Audio 30 APS
with CODE (525) MB Audio 50 APS radio
with CODE (527) COMAND APS (with navigation)
with CODE (529) HIGH Class Japan
with CODE (530) COMAND APS USA (with navigation system)
P82.61-2545-06
Shown on model 203.0
1 Right wirings
2 Cable
3 Clutch
A2/23 GPS antenna
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1.1 | Detach headliner and place down to front | Model 203.0, 209.3 See remove/install headliner: | |
Model 203.0 | |||
Model 209.3 | |||
1.2 | Remove liftgate window | Model 203.2, 203.7 | |
2 | Remove coupling (3) from right-hand C-pillar bracket | ||
3 | Separate connector (3) | ||
4 | Unclip right wirings (1) and remove line (2) | ||
5 | Detach GPS antenna (A2/23) from the rear-end door window | Heat up repair area carefully with a heat gun. | |
Electric plastic hot air blower | |||
Installation: When glueing on the GPS antenna (A2/23) ensure that this, after detaching the protective foil on the adhesive pad, is mounted immediately on the rear-end door window and is pressed on for approx. 5 seconds. | |||
Assembly wedge | |||
6 | Remove remains of adhesive on the rear-end door window | Installation: Treat the bonding surface on the rear-end door window with activator or bonding agent. | |
Activator | |||
Bonding agent Sika primer 206 G+P | |||
7 | Install in the reverse order |
Special tools
110 589 03 59 00
Mounting wedge
Repair materials
Number | Designation | Order number |
BR00.45-Z-1019-02A | Bonding agent Sika primer 206 G+P | Sika Deutschland GmbH |
BR00.45-Z-1023-04A | Sika activator | A 005 989 58 71 |