Removing and installing washer fluid reservoir of windshield washer system

AR82.35-P-6000AK

Removing and installing washer fluid reservoir of windshield washer system

16.6.04

 

Remove/Install

1

Open engine hood and secure against falling down

2

Open locking mechanism (2)

3

Remove washer fluid reservoir (1) upward out of the engine compartment until the detachable parts on the washer fluid reservoir (1) are accessible

 Installation: Make sure that the mount (4) is seated correctly on the radiator crossmember.
Clip hose (7) into the bracket (8) on the washer fluid reservoir (1).

4.1

Detach retainer tab (3) on one side on the washer fluid reservoir (1) and twist until the windshield washer fluid pump (M5/1) is accessible

Only on model 169.0/3

5

Use mounting wedge to unclip windshield washer fluid pump (M5/1) out of the washer fluid reservoir (1)

 Collect washer fluid which flows out.



*110589035900

 Installation: Install new gasket (9).

6.1

Use mounting wedge to unclip HCS pump (M5/2) out of the washer fluid reservoir (1)

For vehicles with code (614) Bi-xenon headlamp unit or for model 245.2 with code (615) Bi-xenon headlamp unit with integrated curve illumination



*110589035900

 Installation: Replace seal (10).

7.1

Disconnect electrical connector (arrow) at the windshield washer fluid level indicator switch (S42)

For vehicles with code (614) Bi-xenon headlamp unit or for model 245.2 with code (615) Bi-xenon headlamp unit with integrated curve illumination

8.1

Use mounting wedge to unclip heat exchanger lid (5) on the washer fluid reservoir (1) and guide heat exchanger (6) out of the washer fluid reservoir (1)

For vehicles with code (875) Heated windshield washer system.

 Heat exchanger lid (5) and heat exchanger (6) are one component.
Heat exchanger (6) must be twisted when guiding out.



*110589035900

9

Take off washer fluid reservoir (1)

10

Install in the reverse order

11

Fill washer fluid reservoir (1)



Windshield washer system - inspect fluid level, adjust to correct level

AP82.35-P-8210AK

12

Check windshield wiper system for proper function, if necessary adjust spraying nozzles



Windshield wipers, windshield washer system and headlamp cleaning system - function check

AP82.30-P-8252AK