P82.30-2009-06
Shows model 220
1 Nut, wiper motor shaft
2 Crank
3 Screw/bolt, wiper motor
4 Bracket
A Angle between crank and rib
M6/1 Wiper motor
| Removing | ||
Danger! | Injury Hazard! Windshield wiper mechanism can pinch, crush or, in extreme cases even sever extremities | Always remove ignition key when working on windshield wiper mechanism. | |
1 | Open engine hood and move to vertical position | ||
2 | Remove wiper system | ||
3 | Unscrew nut of wiper motor shaft (1) | ||
4 | Pull off crank (2) with wiper linkage | ||
5 | Unclip connector at bracket (4) | ||
6 | Remove screws/bolts at wiper motor (3) | ||
7 | Remove wiper motor (M6/1) | ||
| Install | ||
8 | Move wiper motor (M6/1) to parked position | ||
9 | Insert wiper motor (M6/1) | ||
10 | Screw in wiper motor (3) screws/bolts | | |
11 | Unclip connector at bracket (4) | ||
12 | Align crank (2) in angle (A) to top rib of wiper motor bracket | ||
13 | Turn nut on wiper motor shaft (1) | | |
14 | Install wiper system | ||
15 | Close engine hood | ||
16 | Check operation of windshield wipers |
Test and adjustment values for windshield wiper
Number | Designation | Model 215, 220 | ||
BE82.30-P-1001-01C | Dimension | Angle "A" between crank and rib | ° | 74 |
See picture | ||||
Windshield wiper