AR82.30-D-7700A | Remove/install rain sensor | 11.9.02 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor
D82.30-0017-06
1 Mirror
2 Cover
3 Mirror arm
4 Cover
5 Rain sensor
6 Felt strip (anti-rattle)
7 Plug-in wiring plug connection
8 Hinge (sun visor)
| Remove/Install | ||
1 | Disconnect and remove both covers (2) | ||
2 | Press mirror arm (3) down off the mirror base parallel to the windshield | To facilitate disassembly, lift up the retaining collar (arrow) slightly using a screwdriver (reduction in breakaway torque). | |
3 | Separate and remove covers (4) | ||
4 | Loosen both inner hinges (8) of the sun visors | ||
5 | Raise headliner at the front and remove cable strands | ||
6 | Pull off felt strip (protection against rattling) (6) | ||
7 | Unplug electrical connector (7) | ||
8 | Remove rain sensor (5) | Do not touch the gel-like sensor surface of the rain sensor, otherwise its function is impaired or the rain sensor becomes unusable. | |
10 | Install in the reverse order | ||
11 | Check for proper function |