ar8230d7700a

Remove/install rain sensor

Type ar · topic 82.30 · version 0102 · 2003-09-15

Applies to: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.30 Windshield wipers — Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.12 Sensor/switch/wiring harness — Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

AR82.30-D-7700A

Remove/install rain sensor

11.9.02

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Remove/install rain sensor

D82.30-0017-06

1 Mirror

2 Cover

3 Mirror arm

4 Cover

5 Rain sensor

6 Felt strip (anti-rattle)

7 Plug-in wiring plug connection

8 Hinge (sun visor)

Remove/Install

1

Disconnect and remove both covers (2)

2

Press mirror arm (3) down off the mirror base parallel to the windshield

To facilitate disassembly, lift up the retaining collar (arrow) slightly using a screwdriver (reduction in breakaway torque).

3

Separate and remove covers (4)

4

Loosen both inner hinges (8) of the sun visors

5

Raise headliner at the front and remove cable strands

6

Pull off felt strip (protection against rattling) (6)

7

Unplug electrical connector (7)

8

Remove rain sensor (5)

Do not touch the gel-like sensor surface of the rain sensor, otherwise its function is impaired or the rain sensor becomes unusable.

10

Install in the reverse order

11

Check for proper function