Remove/install rain sensor control module

ประเภท ar · หัวข้อ 82.30 · เวอร์ชัน 0102 · 2003-09-15

ใช้กับ: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

ไม่มีใน “th” แสดงเป็น อังกฤษ

AR82.30-D-6285A

27.9.02

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Remove/install rain sensor control module

1 Tie strap

2 Plug-in wiring plug connection

3 Nut

4 Screw

5 Control module

D82.30-0019-03

 	Remove/install
1	Use a knife to cut through tie straps (1) on control module (5)
2	Unlock and disconnect electrical connector (2) on control module (5)
3	Unscrew both nuts (3) and remove control module
4	Install in the reverse order
5	Perform function check