ar8230d6285a

Remove/install rain sensor control module

Type ar · topic 82.30 · version 0102 · 2003-09-15

Applies to: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.30 Windshield wipers — Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

EinPAS 36 Visibility › 36.30 Wiping/washing › 36.30.11 Control unit/relay — Series 901 (models 6**) · Series 902 (models 6**) · Series 903 (models 6**) · Series 904 (models 6**) · Series 905 (models 6**)

AR82.30-D-6285A

Remove/install rain sensor control module

27.9.02

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Remove/install rain sensor control module

1 Tie strap

2 Plug-in wiring plug connection

3 Nut

4 Screw

5 Control module

D82.30-0019-03

Remove/install

1

Use a knife to cut through tie straps (1) on control module (5)

2

Unlock and disconnect electrical connector (2) on control module (5)

3

Unscrew both nuts (3) and remove control module

4

Install in the reverse order

5

Perform function check