AR82.10-W-4720E | Removing and installing headlamp | 5.9.96 |
MODEL 375.3 with BODY 375.810
MODEL 375.4 with BODY 375.840
MODEL 944 with BODY 944.899
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899
MODEL 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 with BODY 942.899
W82.10-0001-06
1 Phillips screw
2 Collared nut
3 Connector
E8 Left headlamp
E9 Right headlamp
| Removing, installing | ||
1 | Unscrew Phillips screws (1) from left/right headlamp (E8/E9) | ||
2 | Pivot out headlamp | ||
3 | Disconnect connector (3) from headlamp | ||
4 | Unscrew collared nuts (2) from bottom and top headlamp bearings | ||
5 | Unclip bottom headlamp bearing from its mounting and remove headlamp | Installation: Fit the headlamp on the upper bearing first. Then pivot the headlamp out as far as possible and insert into bottom bearing. | |
6 | Install in the reverse order | ||
7 | Check and adjust headlamp | ||
|