N82.10-0894-01
N82.10-2218-01
N82.10-0464-01
Model 375.1/3, 970, 972, 974, 975, 976 |
1 | Adjustment screw |
Model 375.4 with body 375.840, model 944 with body 944.899 |
1 | Setting screws |
3 | Additional headlamps |
7 | Turn signal lamp |
Model 374.5, model 375.3, model 950, 952, 953, 954 except model 954.062 |
1 | Setting screws |
2 | Front fog lamp |
3 | Additional headlamps |
N82.10-2504-01
N82.10-2304-01
N82.10-2140-01
Model 374.6, model 375.4 with body 375.860, model 940, 942, 943, 944 with body 944.890 |
1 | Setting screws |
2 | Front fog lamp |
Model 930, 932, 933, 934 |
1 | Adjustment screw |
2 | Front fog lamp |
Model 954.062 |
1 | Setting screws |
N82.10-2021-01
N82.10-0467-01
N82.10-2815-01
Model 957 |
1 | Adjustment screw |
Headlamp range adjuster (example) |
A | Basic position (unloaded) |
B | Loaded |
Headlamp range controller changed version (example) |
0 | Basic position (unloaded) |
| Check | ||
1 | Check tire pressure, correct if necessary | ||
2 | Drive vehicle to level surface | Vehicle must be in ready-to-drive condition (unladen, full fuel tank or with corresponding additional weight). | |
3 | Move chassis to "drive position" | For vehicles with air suspension only. | |
The operating pressure must be min. 9 bar. | |||
4 | Align headlamp aimer to vehicle | ||
Notes on determining headlamp aiming values | |||
To do so, adjust specified headlamp inclination on scale of headlamp aimer. The headlamp aimer operating instructions should be followed exactly. | |||
5 | Switch on low beam | ||
6 | Check headlamp range control for proper function | For vehicles with leaf spring suspension, both light beams of the headlamps must be evenly adjusted. | |
7 | Set headlamp range adjustment to basic position (unladen) (A or 0) | ||
8 | Check setting of low beam and correct, if necessary, at the adjusting screws (1) | ||
Depending on the vehicle equipment involved, the protective grille or the cover surrounding the headlamp may need to be removed before adjusting the low beam. | |||
9 | Switch on high beam and check the setting of the high beam (main headlamps) | ||
10 | Switch on additional headlamp (3) and check setting, correct if necessary | ||
11 | Switch on front fog lamp (2) and check setting, correct if necessary | ||
12 | Switch off lighting |