Shown on model 470 |
1 | Front KEYLESS-GO antenna |
2 | Bolts |
3 | Electrical connector |
S80.61-0001-06
Shown on model 471 |
1 | Front KEYLESS-GO antenna |
2 | Bolts |
3 | Electrical connector |
S80.61-A000-06
Topical note | Notes on carrying out repair work in the vehicle interior | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
2 | Remove front trim at center console and move outside of working area with connected electric lines. | ||
3 | Disconnect electrical connector (3). | ||
4 | Unscrew screws (2) and remove front KEYLESS-GO antenna (1). | ||
5 | Install in the reverse order | ||
| Check | ||
6 | Perform function test of KEYLESS-GO drive authorization system. |