AR77.75-W-0006A | Remove, install seal on pop-up roof frame | 7.7.10 |
MODEL 375.1, 958.0, 970, 972, 974, 975, 976 with CODE (DS3) Pop-up roof, electric
MODEL 375.1, 958.0, 970, 972, 974, 975, 976 with CODE (DS8) Power glass tilting roof with sunroof
MODEL 374.5 /6, 375.3 /4, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 /4 with CODE (DS3) Electric pop-up roof
MODEL 374.5 /6, 375.3 /4, 940, 942, 943, 944, 950.5 /6, 952.5 /6, 953.6, 954.5, 958.2 /4 with CODE (DS8) Power glass tilting roof, incl. sun screen
W77.20-0010-11
1 Gasket
2 Frame
W77.75-1006-01
1 Gasket
2 Frame
M20 Tilting roof motor
Arrow Joint
| Removing | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Remove pop-up roof | ||
2 | Remove seal (1) on pop-up roof frame (2) | ||
3 | Completely remove sealing residues from pop-up roof frame (2) | ||
| Install | ||
4 | Install new seal (1) on pop-up roof frame (2) | The seal (1) should make contact with the outside of the frame (2). The seal joint (arrow, 1) should be located behind the pop-up roof motor (M20) and glued. | |
5 | Install pop-up roof |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1080-02A | Adhesive/Cyberbond 2241 | A 009 989 16 71 |