AR72.10-W-1910B | Remove/install front door window | 14.11.11 |
MODEL 375.1 with BODY 375.830
MODEL 375.3 with BODY 375.810
MODEL 375.4 with BODY 375.840
MODEL 944.0 /2 with BODY 944.899
MODEL 950.5/ 6, 952.5/ 6, 953.6, 954.5 with BODY 940.899
MODEL 970.0 /2 /3 /6, 972.0 /3, 974.2, 975.0 /2, 976.0 /3 with BODY 972.899
W72.10-1010-12
Shown on model 944 with body 944.899
1 Screw
2 Bolts
3 Driver
4 Window guide
W72.10-1011-12
Shown on model 944 with body 944.899
4 Window guide
5 Window
6 Retaining rail
Modification notes
1.10.11 | "Risk of injury caused by body parts being pinched or crushed and in extreme cases being severed when working on the mechanical components" added. | ||
Check anti-pinch protection on power window added | Operation step 14 |
| Remove/install | ||
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
Danger! | Risk of injury due to hands being crushed when window glass is not secure | Secure window to prevent it from falling down. | |
| Notes on self-locking nuts and bolts | ||
1 | Open window (5) approx. 5 cm | ||
2 | Remove door trim | ||
3 | Remove inner door panel | ||
4 | Remove bolts (1) in inner area of window guide (4) | ||
5.1 | Reconnect power window | With code (FE5) Driver and front passenger door power windows | |
5.2 | Reattach window crank of mechanical power window | With code (FE5) Driver and front passenger door power windows | |
6 | Lower window (5) all the way | ||
7 | Remove bolts (1) in upper area of window guide (4) | ||
8 | Roll window (5) all the way up | ||
9 | Secure window (5) with retaining bracket against falling down | ||
| Retaining bracket for window in front door | ||
10 | Remove window (5) from driver (3) on power window | Model 375.3/4, 944, 950.5/6, 952.5/6, 953.6, 954.5 | |
Model 375.1, 970, 972, 974, 975, 976 | |||
11 | Remove window (5) with window guide (4) | Tilt window (5) with window guide (4) toward inside and lift out upward with cup suction tool. | |
12 | Install in the reverse order | ||
13 | Check power window for proper function | ||
14 | Check power window for anti-pinch protection | Only on vehicles with code (FZ3) Comfort locking system with remote control. |
Front door
Number | Designation | Model | |
BA72.10-N-1016-01B | Bolt, power window driver on window retaining rail | Nm | 7 |
Front door