Adjust front door crank window

AR72.10-P-1950G

Adjust front door crank window

20.3.96

7.8.96

Checking front door adjustment added

Step 1 new

AR72.10-P-0550G

Adjusting

1

Check front door adjustment, adjust if necessary

AR72.10-P-0550G

2

Remove door liner on front door

AR72.10-P-1000G

3

Pull off door foil on inner door panel

4

Loosen nuts (4) from both stop brackets

5

Close crank window until it is flush with front edge (arrows) of front door (mirror triangle)

6

Remove plug (3), loosen screw until guide rail (1) can be moved

7

Adjust crank window so that the upper glass edge makes contact with the inner rubber sealing lip (arrows) over the entire length when the door lock is in the first catch position, then tighten bolts (2) and nuts (4)

 In the second detent stage of the door lock the edge of the glass of the crank window must disappear completely below the rubber seal.
If necessary, the inclination of the crank window can be corrected by loosening the bolts (6 and 8) and the longitudinal direction of the crank window can be corrected by loosening the bolt (7).
In addition, the inclination of the crank window relative to the weatherstrip can be increased or reduced by loosening the nut (5), the sliding jaw must be moved for this purpose.

8

Tighten bolts (6, 7 and 8) and nut (5) if they were loosened

 Check crank window adjustment, if necessary:

Repeat adjustment.

9

Install plug (3)

10

Check crank window for ease of movement

 Grease sliding jaws and guide rail (1) as well as window lift rail with multi-purpose paste

*BR00.45-Z-1009-06A

11

Reattach door foil on inner door panel

Replace damaged door foil

12

Install door liner on front door

AR72.10-P-1000G

Number

Designation

Order number

BR00.45-Z-1009-06A

Multi-purpose paste

A 000 989 80 51 10