Remove/install front door inner actuation

AR72.10-P-1400LWE

Remove/install front door inner actuation

21.01.2020

Model

213

Modification notes

15.01.2020

Document revised completely.

2

Inside door handle

5

Plastic spot weld

Shown on left door lining (1)

1

Door lining

3

Plastic spot welds

2

Inside door handle

5

Plastic spot weld

 

Remove/install

1

Remove door lining (1).

AR72.10-P-1000LW

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

2.1

Drill out plastic spot welds (3, 5) and remove inside door handle (2).

If inside door handle (2) is attached with plastic spot welds (3, 5).

AR72.00-P-0001-01LW

 Installation: Shorten welded spacer of drilled out plastic spot weld (5) up to contact surface.
Replace drilled out plastic spot welds (3) by screws. The drilled out plastic spot weld (5) remains free and is not replaced by a screw.
Attach inside door handle (2) using screws from the repair kit.

2.2

Remove screws and remove inside door handle (2).

If the inside door handle (2) is attached using screws.

3

Install in the reverse order.