ar7210p1400lwe

Remove/install front door inner actuation

Type ar · topic 72.10 · version 0300 · 2020-02-07

Applies to: Model 213

Where it sits

Function group 3 Body › 72 Doors › 72.10 Front door — Series 213

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.32 Lock/actuation — Series 213

AR72.10-P-1400LWE

Remove/install front door inner actuation

21.01.2020

Model

213

Modification notes

15.01.2020

Document revised completely.

Remove/install front door inner actuation

2

Inside door handle

5

Plastic spot weld

P72.10-A051-05

Remove/install front door inner actuation

P72.10-A062-09

Shown on left door lining (1)

1

Door lining

3

Plastic spot welds

2

Inside door handle

5

Plastic spot weld

Remove/install

1

Remove door lining (1).

AR72.10-P-1000LW

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

2.1

Drill out plastic spot welds (3, 5) and remove inside door handle (2).

If inside door handle (2) is attached with plastic spot welds (3, 5).

AR72.00-P-0001-01LW

Installation: Shorten welded spacer of drilled out plastic spot weld (5) up to contact surface.
Replace drilled out plastic spot welds (3) by screws. The drilled out plastic spot weld (5) remains free and is not replaced by a screw.
Attach inside door handle (2) using screws from the repair kit.

2.2

Remove screws and remove inside door handle (2).

If the inside door handle (2) is attached using screws.

3

Install in the reverse order.

Referenced documents