Remove/install trim at C-pillar

AR68.30-P-4490MFX

Remove/install trim at C-pillar

16.01.2020

Model

247.6

1

C-pillar paneling

2

Belt end fitting

3

Guide

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Release side trim in rear on left and right until nut of seat belt end fitting (2) can be accessed.

AR68.30-P-4780MFX

2

Remove nut from seat belt end fitting (2).

 Screw/nut, seat belt end fitting/rear seat belt buckle to body

*BA91.40-P-1006-01X

3

Unclip seat belt end fitting (2).

 Dismantling tool

*000589956300

4

Unclip C-pillar trim (1) and extend downward out of the roof lining.


Carefully extend C-pillar trim (1).
Otherwise the roof lining will be damaged.

 Installation: Ensure that the position of the guide (3) is correct.

 Dismantling tool

*000589956300

5

Extend seat belt through seat belt outlet cover of C-pillar trim (1).

6

Install in the reverse order.

 Seat belts/emergency tensioning retractors

Number

Designation

Model 247

BA91.40-P-1006-01X

Screw/nut, seat belt end fitting/rear seat belt buckle to body

Nm

35