Remove/install headliner

AR68.30-P-4300LWS

Remove/install headliner

22.05.2019

Model

205.2

Model

213.2

Model

253

Model

293

Shown on model 205.2 except code 413 (Panoramic sliding sunroof)

1

Headliner

2

Sun visor

3

Bracket

4

A-pillar trim panel

5

Front grab handle

6

Rear grab handles

7

Upper B-pillar paneling

8

Covers

9

C-pillar paneling

10

D-pillar paneling

11

Edge guard

A67

Inside rearview mirror

Shown on model 205.2 with code 235 (Active Parking Assist with PARKTRONIC)

12

Foam material

13

Electrical connector

Shown on model 205.2 with code 235 (Active Parking Assist with PARKTRONIC) and with code 413 (Panorama sliding sunroof)

1

Headliner

15

Guides

14

Solenoids



Remove

1

Completely open front roller sunblind and rear roller sunblind on panoramic roof.

Model 205.2, 213.2, 253
with code 413 (Automatic panoramic sliding sunroof)

2

Remove inside rearview mirror (A67).

AR68.40-P-0001LW

3

Fold back foam material (12) and disconnect electrical connector (13).

Model 205.2, 213.2, 253
with code 235 (Active Parking Assist with PARKTRONIC)

4

Remove sun visors (2) and brackets (3).

AR68.60-P-5480NKB

5

Remove left and right A-pillar trim (4).

AR68.30-P-4050LW

6

Remove front grab handles (5) and rear grab handles (6).

AR68.30-P-4330NKB

7

Release top left and right B-pillar trim (7) and remove from working area.

AR68.30-P-4700LW

 Do not remove belt end fittings from front seats.

8

Remove covers (8).

Model 205.2, 213.2, 253.1/9, 293

 Long wedge

*115589035900

9

Remove left and right C-pillar trim (9).

Model 205.2, 213.2

AR68.30-P-4490LWS

Model 253 (except 253.992/993), 293

AR68.30-P-4490LWG

Model 253.992/993

AR68.30-P-4490RFW

10

Remove left and right D-pillar trim (10).

Model 205.2

AR68.30-P-4495LW

Model 253, 293

AR68.30-P-4495LWG

Model 213.2

AR68.30-P-4497LWT

11

Detach edge guards (11) in the area of the roof lining (1) from the body flange.

12

Adjust front seat head restraint downward.

13

Adjust seat backrests of the front seats toward the rear.

14

Fold back seat backrests in the rear passenger compartment.

Model 253.3

15

Press catch hooks together (arrows) and lower front roof lining (1).

16

Remove magnets (14) on roof lining (1) from roof.

 Model 253.3
There are two additional magnets (14) in the rear section of the headliner (1).

 Velcro fasteners may be installed instead of magnets (14).

 Helper required for holding headliner (1).

17.1

Push roof lining (1) toward the rear until the guides (15) on the rear roof frame are unhooked.

Model 205.2, 213.2, 253.1/9, 293

17.2

Release roof lining (1) downward from roof frame.

Model 253.3

18

Remove roof lining (1) from the vehicle toward the rear.


Do not bend headliner (1) excessively.
Otherwise the headliner (1) can kink and be damaged.

 Helper required.

19

Remove the old frames under the covers (8) from the brackets on the body.

Model 213.2



Check

20

Check dampings on the roof lining (1) for correct seating and condition.

Model 213.2
with code 460 (Canada version)
Model 213.2
with code 494 (US version)
Model 253
with code 460 (Canada version)
Model 253
with code 494 (US version)
Model 293
with code 460 (Canada version)
Model 293
with code 494 (US version)
If the headliner (1) is reused.

If there is a problem,



Replace the affected soundproofing on the headliner (1).



Install

21

Prepare new headliner (1) for installation.

When replacing roof paneling (1).

Model 253.992/993

AR68.30-P-4305-16RFW

Model 205.2, 213.2, 253 (except 253.992/993), 293

AR68.30-P-4305-16LW

Adhesive tape roll, non-woven Tesa tape, 50 meters, 50 mm wide

*BR00.45-Z-1144-02A

22

Install new frame and new covers (8) on roof lining (1).

Model 213.2

AR68.30-P-4300-13LWT

23

Insert roof lining (1) into the vehicle from the rear.


Do not bend headliner (1) excessively.
Otherwise the headliner (1) can kink and be damaged.

 Helper required.

24.1

Fasten top roof lining (1) to roof frame.

Model 253.3

 Ensure that guides (15) are correctly seated.

24.2

Position roof lining (1) and push forward until the guides (15) are hooked on the rear roof frame.

Model 205.2, 213.2, 253.1/9, 293

25

Fasten magnets (14) on roof lining (1) onto roof.

 Model 253.3
There are two additional magnets (14) in the rear section of the headliner (1).

 Velcro fasteners may be installed instead of magnets (14).

 Helper required for holding headliner (1).

26

Engage frames under the covers (8) on the brackets on the body.

Model 213.2

27

Engage roof lining (1) in the area of the catch hooks (arrows) on the roof frame.

28

Fold back seat backrests in the rear passenger compartment.

Model 253.3

29

Adjust seat backrests of front seats back into the default position.

30

Adjust head restraints of the front seats back into the default position.

31

Attach edge guards (11) in the area of the roof lining (1) to the body flange.

32

Install left and right D-pillar trim (10).

Model 205.2

AR68.30-P-4495LW

Model 253, 293

AR68.30-P-4495LWG

Model 213.2

AR68.30-P-4497LWT

33

Install left and right C-pillar trim (9).

Model 205.2, 213.2

AR68.30-P-4490LWS

Model 253 (except 253.992/993), 293

AR68.30-P-4490LWG

Model 253.992/993

AR68.30-P-4490RFW

34

Install covers (8).

Model 205.2, 253.1/9
Model 293

 Long wedge

*115589035900

35

Install left and right top B-pillar trim (7).

AR68.30-P-4700LW

 Do not remove belt end fittings from front seats.

36

Install front grab handles (5) and rear grab handles (6).

AR68.30-P-4330NKB

37

Install left and right A-pillar trim (4).

AR68.30-P-4050LW

38

Install sun visors (2) and brackets (3).

AR68.60-P-5480NKB

39

Connect electrical connector (13) and fold back foam material (12).

Model 205.2, 213.2, 253
with code 235 (Active Parking Assist with PARKTRONIC)


Completely pull foam material (12) over electrical connection (13).
Otherwise noises can occur.

40

Install inside rearview mirror (A67).

AR68.40-P-0001LW

41

Completely close rear roller sunblind and front roller sunblind on panoramic roof.

Model 205.2, 213.2, 253
with code 413 (Automatic panoramic sliding sunroof)

Repair materials

Number

Designation

Order number

BR00.45-Z-1144-02A

Adhesive tape roll, non-woven Tesa tape, 50 meters, 50 mm wide

A 008 989 50 85 09