Steering wheel, jacket tube, steering shaft
Number | Designation | Model | ||
BA46.10-N-1002-05C | Jacket tube for steering shaft to belt rail | Nm | 25 | |
D68.10-1118-06
1 Insert instrument panel support with instrument panel.
Ensure that shift cables, lines to ventilation unit and lines through opening for instrument cluster are routed correctly (arrows).
2 Tighten screws (12) to firewall in engine compartment.
Observe tightening sequence (A to F)!
3 Tighten screws (14).
4 Clip in covers (13).
D68.10-1111-01
5 Tighten jacket tube (7) with bolts (6), .
Do not move jacket tube (7) in the axial direction to prevent jacket tube (7) from sliding out of rubber grommet (arrow).
D68.10-1112-01
D68.10-1110-01
6 Install transponder (5) on steering wheel lock and lay connection line for opening instrument cluster.
The extension on the transponder (5) should engage in the groove on the ignition switch.
7 Hook spring (4) onto brake pedal and jacket tube.
D68.10-1109-01
D54.21-1101-01
8 Clip in engine control unit (11).
9 Screw on ground connection (10).
10 Connect connectors (9).
D54.18-1108-01
D68.10-1108-01
11 Install protective mat (3).
12 Position center tunnel covers (2) and screw down with screws (8).
Install left center tunnel cover first.
D68.30-1102-01
D68.30-1101-01
13 Install floor covering (1) in footwell on passenger side.
Turn slotted screw from position B to position A.