1 | Front roof frame |
2 | Sun visor mount |
W65.20-1051-06
Danger | Risk of explosion caused by paint vapors igniting. Risk of poisoning caused by inhaling paint vapors. | No smoking! No open fire! Use respiratory protection, protective clothing, gloves, safety glasses and protective skin cream. Ensure that the area is well ventilated. | |
Danger | Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents | Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection. | |
Danger | Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area. | ||
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
Topical note | Notes on paintwork repairs | ||
Topical note | Notes on cavity preservation | ||
Topical note | General information on body repair | ||
Topical note | Measures for preventing damage to vehicles or components when performing electric welding work | ||
General notes on welding | |||
| Remove | ||
1 | Remove roof paneling front section. | ||
2 | Separate front roof frame (1). | ||
Separate front roof frame (1) with bracket for sun visor (2). | |||
3 | Prepare connecting points on A-pillars for installation. | ||
Commercially available tools | |||
Zinc dust paint suitable for spot welding | |||
4 | Prepare front roof frame(1) for installation. | ||
Commercially available tools | |||
Zinc dust paint suitable for spot welding | |||
| Install | ||
5 | Install front roof frame(1). | ||
Commercially available tools | |||
6 | Install roof paneling front section. |