The superordinate service document as well as the safety information in the service document must be observed.
The following commercially available tools are required to perform operation steps: rotary wire brush, body power jigsaw, wet/dry vacuum cleaner.
1 | Shorten the bracket for the sun visor as best suits the old part since replacement parts are involved here. |
Only for code F1R (L cab). |
2 | Grind spot weld flanges in cross-hatched areas to bare metal on both sides. |
3 | Apply zinc dust paint to insides of spot weld flanges. apply zinc dust paint. |
4 | Remove shavings and drill chips. |
W65.20-1011-03