1 | Rear roof frame |
S65.20-4588-06
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | General information on body repair | ||
General information on MB materials | |||
| Remove | ||
1 | Remove all detachable parts in area to be repaired | ||
2 | Cover all detachable parts remaining in vehicle with welding protection blankets | Commercially available devices/tools | |
3 | Remove center roof paneling with roof bows | ||
4 | Remove rear roof frame (1) | ||
Commercially available devices/tools | |||
Zinc dust paint suitable for spot welding | |||
5 | Prepare rear roof frame (1) for installation | ||
Commercially available devices/tools | |||
Zinc dust paint suitable for spot welding | |||
| Install | ||
Danger | The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases | Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system. | |
6 | Install rear roof frame (1) | ||
Topical note | Measures for preventing damage to components when performing electric welding and soldering work | ||
| 000 588 01 84 00 Welder | ||
Commercially available devices/tools | |||
Zinc dust paint suitable for spot welding | |||
7 | Install center roof paneling with roof bows | ||
8 | Install all detachable body components in area to be repaired |