S62.10-0001-09
Shown on model 447.813 |
1 | Crash box | 2 | Bracket | 3 | Bolts |
Shown on model 447.803 |
1 | Crash box |
2 | Bracket |
3 | Bolts |
S62.10-A000-76
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 447 with engine 780.701/702 | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | Model 447 with engine 780.701/702 | |
| Remove/install | ||
1 | Remove front bumper. | ||
2 | Remove washer fluid reservoir. | When removing the left crash box (1). | |
For this purpose, remove the nuts and move the washer fluid reservoir out of the working area. | |||
3 | Remove the bumper's bracket. | ||
4 | Take radiator unit out of brackets (2) on crash boxes (1). | Secure radiator unit on crossmember against falling down. | |
5 | Remove corresponding crash box (1). | To do this, remove screws/bolts (3). | |
M8 | |||
6 | Install in the reverse order. |