P61.30-2071-09
Shown on side right underfloor paneling |
3 | Nuts | 6 | Retaining clips | |
4 | Bolts | 22 | Underfloor paneling, right | |
5 | Bolts |
P61.30-2072-09
Shown on model 177.0 with engine 608 and code U54 (Torsion-beam axle) |
2 | Rear underfloor paneling | 12 | Bolts | |
10 | Mounting clip | 21 | Underfloor paneling, left | |
11 | Bolts | 22 | Underfloor paneling, right |
P61.30-A008-09
Shown on model 177 with engine 282 with code ME08 (Hybrid drive 75-84 KW VARIANT (INCLUDING PLUG-IN)) |
2 | Rear underfloor paneling | 11 | Bolts | 12 | Bolts | ||
10 | Retaining clips |
Shown on model 118.3 with engine 608 |
7 | Cover |
8 | Rear trim |
9 | Bolts |
13 | Bolts |
14 | Bolts |
P61.30-A006-03
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
| Remove/install | ||
1 | Lift vehicle with lifting platform. | ||
The adapter set is required only for the left underfloor paneling (21) or right underfloor paneling (22). | |||
Remove left underfloor paneling (21) and right underfloor paneling (22) | |||
2 | Remove nuts (3). | ||
3 | Remove screws (4, 5). | ||
4 | Unclip retaining clips (6) and remove left underfloor paneling (21) or right underfloor paneling (22). | Installation: Ensure that the left underfloor paneling (21) or right underfloor paneling (22) are seated correctly under the surrounding trims. | |
Dismantling tool | |||
Remove rear underfloor paneling (2) or rear trim (8) | |||
5 | Unclip retaining clips (10). | Model 118 | |
The number of retaining clips (10) varies depending on the vehicle equipment. | |||
Dismantling tool | |||
6 | Remove screws (11). | Model 118 | |
The number of screws (11) varies depending on the vehicle equipment. | |||
7 | Remove screws (12). | Model 177, 247 with engine 282 | |
The number of screws (12) varies depending on the vehicle equipment. | |||
8 | Remove screws (14). | Model 118 | |
9 | Remove screws (9). | Model 118 | |
10.1 | Unclip rear underfloor paneling (2) at arrow and remove. | Model 177, 247 with engine 282, 608, 654 | |
Installation: Ensure that the rear underfloor paneling (2) is seated correctly under the surrounding trims. | |||
10.2 | Remove rear trim(8). | Model 118 | |
Installation: Ensure that the rear trim (8) is seated correctly under the surrounding trims. | |||
Remove trim (7) | |||
11 | Unscrew bolts (13). | Model 118 with engine 608 | |
12 | Remove trim (7). | Model 118 with engine 608 | |
13 | Install in the reverse order. |
000 589 95 63 00
Dismantling tool
203 589 02 31 00
Adapter kit