Prepare side dropside for installation · ar6030s004002p · Mercedes-Benz WIS

AR60.30-S-0040-02P	Prepare side dropside for installation
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A

Model

470, 471

 The following steps are shown on the left side of the vehicle and must be performed analogously on the right side in the event of damage.

1	Drill holes for MAG welding in dropside (1) (area A).

 Commercially available devices/tools
Hand drill

2	Grind mating surfaces on dropside (1) down to bare metal in cross-hatched areas and around holes (area A).

 Commercially available devices/tools
Rotary wire brush

3	Remove shavings and drill chips.

 Commercially available devices/tools
Wet and dry vacuum cleaner

S60.30-0078-06

S60.30-0079-09

4	Drill holes for MAG welding in dropside (1) (areas B, C, D, E, F, G, H and I).

 Commercially available devices/tools
Hand drill

5	Grind mating surfaces on dropside (1) down to bare metal around holes (areas B, C, D, E, F, G, H and I).

 Commercially available devices/tools
Rotary wire brush

6	Remove shavings and drill chips.

 Commercially available devices/tools
Wet and dry vacuum cleaner