S60.30-0151-09
1 | Electrical connector | 4 | Coolant pipe | 7 | Supply pipe | ||
2 | Electrical connector | 5 | Coolant pipe | ||||
3 | Hose | 6 | Hose |
S60.30-0154-09
8 | Bracket | 10 | Bracket | 12 | Stop buffer | ||
9 | Bolts | 11 | Bolts | 13 | Screw |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Disconnect battery ground line | ||
2 | Remove front center crossmember |
| |
Model 470, 471 with engine 699 | |||
3 | Remove lower front crossmember | ||
4 | Remove upper front crossmember for hood catch | ||
5 | Remove front fender | ||
6 | Remove radiator |
| |
Model 470, 471 with engine 699 | |||
7 | Remove condenser |
| |
Model 470, 471 with engine 699 | |||
8 | Remove air filter housing |
| |
Model 470, 471 with engine 699 | |||
9.1 | Remove fuel injection system control unit | Model 470 with engine 200 | |
9.2 | Remove diesel injection system control unit | Model 470, 471 with engine 699 | |
10 | Remove glow output stage |
| |
11 | Disconnect Electrical connections (1, 2) | Model 470, 471 with engine 699 | |
12 | Remove hose (3) from coolant pipe (4) | Model 470, 471 with engine 699 | |
Hose clamp pliers | |||
13 | Remove hose (6) from coolant pipe (5) | Model 470, 471 with engine 699 | |
Hose clamp pliers | |||
14 | Remove hose package (7) | Model 470, 471 with engine 699 | |
15 | Remove bracket (8) | To do this, remove bolts (9) . | |
16 | Remove bracket (10) | To do this, remove screw/bolts (11). | |
17 | Remove screw (13) | Screw (13) is screwed in during body repair. | |
18 | Remove stop buffer (12) | ||
19 | Route electrical subharnesses out of working area | ||
20 | Install in the reverse order |
454 589 00 37 00
Hose clamp pliers