S60.00-4890-09
Shown on model 470 with code FX9 (KEYLESS-GO) |
1 | Bracket (with code FX9 (KEYLESS-GO)) | 4 | Bracket | 7 | Insulation | ||
2 | Screw (with code FX9 (KEYLESS-GO)) | 5 | Bolts | 8 | Nuts | ||
3 | Screw | 6 | Subharness |
9 | Hood support |
10 | Hood support bracket |
11 | Pilot bushing |
12 | Bracket |
13 | Bolts |
S60.00-4891-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Partially remove detachable parts for replacing wheel well on right | ||
2 | Remove hood hinge | ||
3 | Remove battery management control unit |
| |
4 | Remove glove box | ||
5 | Remove front door sill molding | ||
6 | Remove atmospheric pressure sensor |
| |
7 | Remove atmospheric pressure sensor bracket | Model 470 with engine 200 | |
8 | Remove differential pressure sensor |
| |
9 | Remove bracket (1) | Model 470, 471 with code FX9 (KEYLESS-GO) | |
Unscrew bolt (2) to do this. | |||
10 | Remove screw/bolt (3) | ||
11 | Remove bracket (4) | Model 470, 471 with engine 699 | |
Remove screw (5) to do this. | |||
12 | Move electrical subharness (6) out of working area | To do so, disconnect all electrical connectors from subharness (6) in vehicle interior. | |
13 | Remove insulation (7) | To do this, unscrew nuts (8). | |
14 | Remove hood support (9) | ||
15 | Remove bracket (10) for hood support (9) | ||
16 | Remove pilot bushing (11) | ||
17 | Remove bracket (12) | To do this, unscrew screw/bolts (13). | |
18 | Move remaining electrical subharnesses out of working area | ||
19 | Install in the reverse order |