P54.33-3154-09
1 | Mercedes star | 4 | Bolts | |
2 | Cold air intake bridge | B84/9 | Front end 360° camera | |
3 | Electrical connector |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
2 | Remove Mercedes star (1) | ||
3 | Remove cold air intake cross member (2) | ||
4 | Unclip and disconnect electrical connector (3) from radiator grille | ||
5 | Remove screws (4) | ||
6 | Remove front 360° camera (B84/9) from radiator trim | ||
7 | Install in the reverse order | ||
8 | Commission front 360° camera (B84/9) using the diagnostic system | If the front 360° camera (B84/9) was replaced. | |
| |||
9 | Calibrate front 360° camera (B84/9) using the diagnostic system | ||
|