Remove/install instrument cluster

AR54.30-D-6015H

Remove/install instrument cluster

31.05.2016

Model

900, 906

Modification notes

04.05.2016

Repair method completely revised.

1

Clip remover

3

Electrical connector

2

Instrument panel

A1

Instrument cluster



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Temporarily store basic data of the instrument cluster (A1) in the diagnostic system

If the instrument cluster (A1) is replaced.



AD00.00-D-2000-04SD

 Installation: Transfer the cached basic data to the new instrument cluster (A1).

2

Remove the transmitter key from electronic ignition lock (EZS) control unit

3

Lower steering wheel

Model 906
with code CL1 (Height and rake adjustable steering wheel)

4

Insert snap-release tool (1), as shown, between the upper edge of the instrument cluster (A1) and the instrument panel (2)

 Clip remover

*452589016300

5

Swivel upper edge of the instrument cluster (A1) toward the steering wheel

6

Hold the instrument cluster (A1) at the upper edge, carefully swivel it out upwards at the instrument panel and guide it out far enough until the electrical connector (3) is accessible


Swivel out instrument cluster (A1) carefully.
Otherwise the instrument panel (2) may be damaged.

7

Detach electrical connector (3) and remove instrument cluster (A1)

8

Install in the reverse order



Check

9

Perform function test of instrument cluster (A1)