D46.10-1124-11
1 Screw
S144 Combination switch
| Remove/install | ||
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
| Legal requirements on handling and storing airbags and emergency tensioning retractor units | ||
1 | Remove clock spring contact with steering angle sensor | ||
2 | Remove pushbutton switch with variable speed limiter cruise control (TPM) | For code (MS1) Cruise control | |
3 | Remove bolt (1) | Bolt (1) is accessible from below through the lower steering column trim. | |
4 | Detach combination switch (S144) | The electrical connectors are automatically disconnected when detached. | |
Installation: Pay attention to correct installed position. | |||
5 | Install in the reverse order | ||
6 | Carry out function check |