AR54.25-D-2803H | Remove/install cruise control switch | 28.6.11 |
MODEL 900, 906 with CODE (MS1) Cruise control
D46.10-1123-11
1 Clock spring contact
N80s2 Cruise control switch
| Remove/install | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
| Legal requirements on handling and storing airbags and emergency tensioning retractor units | ||
1 | Remove clock spring contact (1) with steering angle sensor | ||
2 | Detach cruise control switch (N80s2) | The electrical connector is automatically disconnected during removal. | |
Installation: Pay attention to correct installation position. | |||
3 | Install in the reverse order | ||
| Check | ||
4 | Perform function test on cruise control | Conduct a road test. |