D54.18-1251-79
1 | Electrical wiring harness | 5 | Cover | |
2 | Screw | 6 | Bracket | |
3 | Electrical connector | 7 | Electrical connectors | |
4 | Nut |
Topical note | Notes on repairs to brake system | ||
| Remove/install | ||
1 | Remove right front wheel. | ||
2 | Remove screw (2) and remove electrical wiring harness (1) until electrical connector (3) is accessible. | Bolt, wiring harness for wear indicator to brake caliper | |
3 | Disconnect electrical connector (3). | ||
4 | Open dust cap (arrow A) and loosen electrical wiring harness (1) from brake caliper. | ||
5 | Unclip electrical wiring harness (1) from holders (arrows B). | ||
6 | Unscrew nut (4). | ||
7 | Loosen trim (5) and fold back until electrical connectors (7) are accessible. | ||
8 | Disconnect electrical connectors (7). | ||
9 | Unclip holder (6) using a suitable tool and remove until the lock (arrow C) is accessible. | ||
10 | Release electrical wiring harness (1) (arrow C) and remove from holder (6). | ||
11 | Install in the reverse order |