P54.10-2472-07
Shown on vehicle up to 31.5.06 |
1 | Ground cable | 4 | Positive line | 7 | Bracket | ||
2 | Positive terminal cover | 5 | Vent hose | 8 | Retaining strap | ||
3 | Nut | 6 | Screw | G1 | Battery |
| Remove/install | ||
Danger | Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC. | No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers. | |
Topical note | Notes on battery | ||
1 | Disconnect ground line (1) from battery (G1) | ||
2 | Remove cover from positive terminal (2) | ||
3 | Release nut (3) and remove positive line (4) from battery (G1) | Installation: | |
4 | Detach vent hose (5) | ||
5 | Remove screw/bolt (6) and remove bracket (7) | ||
6 | Release retaining strap (8) and remove battery (G1) from trunk | ||
7 | Install in the reverse order |