Remove/install battery

AR54.10-P-0005MFA

Remove/install battery

22.07.2020

Model

118, 177, 247

Modification notes

18.03.2020

"Scan QR code on on-board electrical system battery", added.

Step 5

9

Nut

F150/1

Starter battery prefuse box

10

Cover

G1

On-board electrical system battery

11

Nut

R62

Voltage dip limiter

12

Tensioning strap

 Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on battery

AH54.10-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove voltage dip limiter (R62).

AR54.10-P-0014MFA

2

Remove nut (9) of starter battery prefuse box (F150/1) and place starter battery prefuse box (F150/1) to one side with electric lines connected.


Do not crush or kink or subject lines to tension.
This will result in damage to the lines which may impair their functional capability.

3

Remove cover (10).

 Installation: Ensure that guides are seated correctly.

4

Remove nut (11) and release tensioning strap (12).

 Nut, mounting rail to battery frame

*BA54.10-P-1003-01D

5

Scan QR code on on-board electrical system battery(G1), confirm change of on-board electrical system battery (G1) using diagnostic system and fill out test log.

When replacing on-board electrical system battery (G1) after check.



AD00.00-P-2000-06MFA


Non-observance will lead to an incorrect or not accurate charging characteristic.
As a result, the on-board electrical system battery (G1) may be damaged.

 2D Hand scanner

*000589086300

6

Place tensioning strap (12) to one side and remove on-board electrical system battery (G1) upward.

7

Install in the reverse order.

 Battery

Number

Designation

Model 118

Model 177

BA54.10-P-1003-01D

Nut, mounting rail to battery frame

Nm

23

23

 Battery

Number

Designation

Model 247

BA54.10-P-1003-01D

Nut, mounting rail to battery frame

Nm

23