1 | Plug |
2 | Cap |
S49.20-A013-75
Warning | Risk of burn injuries and scalding when working on AdBlue(R) lines and the component parts attached to them. Risk of injury to skin and eyes when handling AdBlue(R). Risk of poisoning caused by swallowing AdBlue(R) | Pour AdBlue® only into suitable containers. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
Topical note | Notes on use, material properties and handling of NOx reducing agent | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Draining | |||
1 | Raise vehicle. | ||
2 | Position suitable, clean receptacles under the exhaust opening (arrow). | ||
3 | Remove plug (1) and capture escaping AdBlue®. | Depending on the structure, a small residual amount (< 0.2 l) remains in the AdBlue® container. | |
If the AdBlue® container has to be emptied completely, | |||
| |||
remove AdBlue® container and remove residual amount. | |||
Remove/install AdBlue(R) tank | |||
4 | Attach plug (1). | ||
5 | Remove the AdBlue® residues. | ||
6 | Lower vehicle. | ||
Filling | |||
7 | Unscrew cap (2) of the AdBlue® filler neck. | | |
8 | Fill AdBlue® tank with filling unit. | ||
| 000 588 07 82 00 Filling unit | ||
| |||
| |||
The filling tools are designed in such a way as to leave an unfilled space in the AdBlue® container after switching off. | |||
AdBlue® tank | |||
| Clean | ||
9 | Remove the AdBlue® residues. | ||
10 | Screw on cap (2). |