AR47.30-D-8220A | Remove/install purge control valve | 23.8.99 |
ENGINE 111.984 in MODELS 901.6, 902.6, 903.6, 904.6
D47.30-1102-12
1 Connector
2 Purge control valve
3 Line of switchover valve/idle speed control actuator
4 Line of switchover valve/activated charcoal canister
| Remove/Install | ||
1 | Remove air intake hose | ||
2 | Remove the connector (1) at the purge control valve (2) | ||
3 | Detach lines (3 and 4) from purge control valve | ||
4 | Take off the purge control valve (2) from the bracket in the upward direction | Installation: While connecting the switchover valve, pay attention to the marking "MOT" on the housing. The arrow must point to the idle speed control actuator. | |
5 | Install in the reverse order |