AR46.30-B-0500A | Remove/install power steering pump | 12.02.16 |
Steering gear 766.468 with Vehicle 695.0
B35.31-0062-06
1 Hydraulic Pump
2 Mounting screw
3 Output piping
4 Input piping
5 Air compressor
6 Coupling Disc
| Remove and install | ||
Danger! | Risk of damages when starting the engine with the gearbox engaged. Danger of injuries when working with hot and running engine. | Make sure the gearbox is in neutral position. Wear appropriate clothes and pay attention to moving and hot parts of the engine. | |
1 | Disconnect battery negative cable or turn off vehicle general key. | Loosen the screw at the side member handle carefully not to loosen the terminal blocks. | |
2 | Tilting the engine hood. | ||
3 | Disconnect the input tubes (4) | | |
4 | Disconnect the output tubes (3). | | |
Collect the hydraulic fluid in an appropriate container, discharging it ecologically. | |||
5 | Loosen the hydraulic pump (1) fastening screws (2) in the air compressor (5) | | |
6 | Remove the hydraulic pump (1) and the coupling disc (6). | ||
7 | Install in the reverse order. | When installing, replace the seal ring and check the piping tightness. |
Power steering pump