ar4630b0500a

Remove/install power steering pump

Type ar · topic 46.30 · version 0100 · 2016-02-12

Applies to: Steering gear 766.468 with Vehicle 695.0

Where it sits

Function group 2 Chassis › 46 Steering › 46.30 Power steering pump — Series 695 (models 0**)

EinPAS 22 Steering › 22.15 Power steering › 22.15.31 Power steering pump/oil reservoir/filter — Series 695 (models 0**)

Also applies to engines/gearboxes: 766 468

AR46.30-B-0500A

Remove/install power steering pump

12.02.16

Steering gear 766.468 with Vehicle 695.0

Remove/install power steering pump

B35.31-0062-06

1 Hydraulic Pump

2 Mounting screw

3 Output piping

4 Input piping

5 Air compressor

6 Coupling Disc

Remove and install

Danger!

Risk of damages when starting the engine with the gearbox engaged. Danger of injuries when working with hot and running engine.

Make sure the gearbox is in neutral position.

Wear appropriate clothes and pay attention to moving and hot parts of the engine.

AS00.00-B-0005-01A

1

Disconnect battery negative cable or turn off vehicle general key.

Loosen the screw at the side member handle carefully not to loosen the terminal blocks.

2

Tilting the engine hood.

AR88.40-B-1000B

3

Disconnect the input tubes (4)

*BA46.30-B-1002-01A

4

Disconnect the output tubes (3).

*BA46.30-B-1002-01A

Collect the hydraulic fluid in an appropriate container, discharging it ecologically.

5

Loosen the hydraulic pump (1) fastening screws (2) in the air compressor (5)

*BA46.30-B-1001-01A

6

Remove the hydraulic pump (1) and the coupling disc (6).

7

Install in the reverse order.

When installing, replace the seal ring and check the piping tightness.

Power steering pump

Número

Denominação

Engine 372.9 , 374.9, 376.9, 377.9

BA46.30-B-1001-01A

Pulley to the hydraulic pump

M14x1.5

Nm

80

BA46.30-B-1002-01A

Pump support to the engine head

M8

Nm

35

M10

Nm

60

Referenced documents