AR46.25-G-3070B | Remove/install adjusting screw of hydraulic limiter | 5.5.10 |
MODEL 405.050 /100 /101 /102 /103 /120 /121 /122 /123 /200 /201 /220 /221
With steering LS6BK
G46.20-3103-01
3 Adjusting bolt, left-hand limiter (marked with "L")
4 Adjusting screw of right limiter (marked with "R")
5 Jam nut
| Removing | ||
1 | Slacken jam nuts (5) on the adjusting screws (3, 4) | ||
2 | Remove adjusting screws (3, 4) | For safety reasons the adjusting screws (3, 4) must not be unscrewed when the engine is running. | |
| Install | ||
3 | Install adjusting screws (3, 4) | Tighten adjusting screws (3, 4) to a maximum of 5 Nm. | |
4 | Tighten jam nuts (5) of adjusting screws (3, 4) | | |
5 | Check and adjust hydraulic limiter |
Steering gear