Remove/install steering shaft

AR46.10-P-7300AK

10.11.11

MODEL 169.0 /3, 245.2

P46.10-2607-09

Shown on model 169.0

1 Rack-and-pinion steering

2 Screw

3 Steering coupling

7 Screw

8 Jacket tube

9 Anti-twist lock

4 Steering coupling

5 Boot

6 Steering shaft

Modification notes

16.6.05

Disconnect steering coupling modified

Operation step 4

 	Remove/install
1	Place rack-and-pinion steering (1) in center position		AR46.20-P-0500-01AK
2	Fix steering wheel in position using the retainer.	 Do not turn steering wheel when steering shaft (6) is removed otherwise clock spring contact in steering column module will be destroyed.
			*129589012100
3	Remove washer fluid reservoir of windshield washer system and place to one side with lines connected.		AR82.35-P-6000AK
4	Unscrew bolt (2) from steering coupling (3) and separate steering coupling (3)	Disconnect if steering coupling (3) is not corroded.	AR46.10-P-8000-01AK
			*BA46.10-P-1001-01H
		Grease	*BR00.45-Z-1006-06A
		Just disconnect a corroded steering coupling (3) for left-hand drive vehicles up to chassis end number 160000 (with model 169) or chassis end number 008500 (with model 245).	AR46.10-P-8000-01AL
			*BA46.10-P-1001-01H
			*203589023300
		Body jig saw gotis://K_58.1_01.0
		Wet/dry vacuum cleaner gotis://P_00.12_06.0
		Grease	*BR00.45-Z-1006-06A
5	Press boot (5) out of firewall
6	Remove cover below dashboard on left		AR68.10-P-1500AK
7	Unscrew bolt (7) from steering coupling (4)	 Installation: Install new self-locking nut of bolt (7).
			*BA46.10-P-1002-01H
8	Detach steering coupling (4) of steering shaft (6) from steering column tube (8)	 Installation: The rack-and-pinion steering (1) must be in the center position. The steering shaft (6) and steering column tube (8) can only be assembled in a specified position which is either specified by an anti-twist lock (9) or locking splines.
9	Remove steering shaft (6) toward inside
10	Install in the reverse order

 Steering shaft

Number	Designation		Model 169	Model 245


BA46.10-P-1001-01H	Clamp screw, steering coupling to rack-and-pinion steering	Nm	20	20
BA46.10-P-1002-01H	Clamp screw, steering coupling to steering column tube	Nm	20	20

203 589 02 33 00

Puller

Holding device

129 589 01 21 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1006-06A	Anti-corrosion grease 40 g / DB supply specification 6834.00	A 001 989 37 51 10

เอกสารที่อ้างถึง