AR42.60-W-0070C | Fill compressed-air reservoir with air from external source | 2.6.09 |
MODEL 930, 932, 933, 934
W42.60-1119-01
W42.60-1120-01
W42.60-1121-01
Vehicles with single-chamber air drier
1 Screw plug
2 Test connection for reservoir pressure/tire filling connection
6.12 Single-chamber air drier with integral pressure regulator
Vehicles with code (BE4) front compressed-air connection
3 Front compressed-air filling connection
Vehicles with two-chamber air drier
1 Screw plug
2 Test connection for reservoir pressure/tire filling connection
6.15 Dual-chamber air drier with integral pressure regulator
W42.60-1204-01
Vehicles with code (BC2) Electronic Air-Processing Unit (EAPU)
1 Screw plug
2 Test connection for reservoir pressure/tire filling connection
6.17 Electronic Air Processing Unit (EAPU)
Filling | |||
1 | Screw compressed air filler connection into screw plug (1) position | Only for vehicles without code (BE4) Front compressed air filler connection, at which a compressed air filler connection is not yet available. Have compressed air filler connection installed into screw plug (1) position | |
2 | Connect filling hose onto compressed air filler connection | ||
3 | Switch on ignition | Only for vehicles with code (BC2) Electronic Air-Processing Unit (EAPU). | |
4 | Inflate compressed air reservoir through compressed air filler connection | Filling the compressed-air system via the test connection for supply pressure/ The tire inflation connection (2) should only be used in an emergency, as otherwise the compressed air is neither cleaned nor dried and overpressure protection is not given. | |
5 | Switch off ignition | Only for vehicles with code (BC2) Electronic Air-Processing Unit (EAPU). | |
6 | Detach filling hose and seal compressed air filler connection using protective cap |