1 | Bolt |
2 | Bracket |
L6/3 | Left rear rpm sensor |
L6/4 | Right rear rpm sensor |
X62/21 | Left rear rpm sensor electrical connector |
X62/22 | Right rear rpm sensor electrical connector |
S42.30-4509-06
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| General information on malfunctions in the brake system | ||
| Remove/install | ||
1 | Raise vehicle | ||
2 | Unscrew bolt (1) | Bolt, rpm sensor to steering knuckle | |
3 | Pull left rear rpm sensor(L6/3) or right rear rpm sensor (L6/4) out of semi-trailing arm | Installation: Apply light coating of grease to left rear rpm sensor (L6/3) or right rear rpm sensor (L6/4). | |
Long-life grease | |||
4 | Detach electrical wiring harness from left rear rpm sensor (L6/3) or right rear rpm sensor (L6/4) | To do so, open cable ties on underfloor and on semi-trailing arm. | |
Installation: Replace cable tie. | |||
5 | Detach electrical connection for left rear rpm sensor (X62/21) or electrical connection for right rear rpm sensor (X62/22) | To do so, detach electrical connection for left rear rpm sensor (X62/21) or electrical connection for right rear rpm sensor (X62/22) from bracket (2). | |
6 | Remove left rear rpm sensor (L6/3) or right rear rpm sensor (L6/4). | ||
| Check | ||
7 | Check electrical line for breakage or chafe marks | Depending on findings | |
| |||
Replace left rear rpm sensor (L6/3) or right rear rpm sensor (L6/4). | |||
8 | Install in the reverse order |