S42.20-4561-09
Shown on model 470 with engine 699 and code ZG3 (Engageable all-wheel drive with transmission ratio) |
1 | Brake cable | 3 | Nut | |
2 | Nut | 4 | Bolts |
Shown on model 470 with engine 699 and code ZG3 (Engageable all-wheel drive with transmission ratio) |
1 | Brake cable |
5 | Screw |
6 | Screw |
S42.20-4562-05
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on repairs to brake system | ||
| Remove/install | ||
1 | Release front brake cable at parking brake lever. | ||
2 | Raise vehicle. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
3 | Remove brake cable (1) at brake compensator lever. | ||
Assembly cleaner | |||
MB brake paste Molykote (copper colored) | |||
4 | Unscrew nuts (2, 3). | Nut, brake cable bracket to body | |
5 | Unscrew screws (4 to 6). | Screw/bolt, rear brake cable bracket to body/rear axle/brake carrier plate | |
6 | Remove brake shoes. | ||
7 | Remove expansion lock and pull brake cable (1) out of brake carrier plate. | ||
8 | Install in the reverse order. | ||
9 | Adjust parking brake. |