Shown on model 470 |
1 | Nut |
S42.20-4557-04
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Notes on repairs to brake system | ||
Adjust | |||
1 | Move parking brake lever to lowest position | ||
2 | Remove cup holder from center console | Long wedge | |
3 | Release nut (1) far enough until the brake cable is slack | ||
4 | Remove rear road wheels | ||
5 | Adjust basic clearance of parking brake | ||
6 | Tighten nut (1) until the parking brake lever can be operated as specified | Adjustment values for default setting of parking brake lever | |
7 | Operate parking brake lever | Adjustment values for default setting of parking brake lever | |
8 | Move parking brake lever to lowest position | ||
9 | Release nut (1) and adjust parking brake | Adjustment values for parking brake lever (end position) | |
10 | Fit rear wheels | ||
Lower vehicle only after checking the rear wheels for unobstructed movement. | |||
11 | Turn left and right rear wheel by hand and check for unobstructed movement | | |
If both rear wheels do not move freely. | |||
| |||
Repeat adjustment procedure. | |||
12 | Lower vehicle and slide support arms of vehicle lift to one side | ||
13 | Perform brake test | ||
|
115 589 03 59 00
Long wedge